I have a 2015 2575 RWC with a volvo penta inboard. The ignition key switch is frozen. I have been looking for a replacement for weeks now. Bennington dealer sends me to Volvo dealer, volvo dealer sends me back to bennington dealer. I need help finding an OEM switch.
Ignition Switch
- Thread starter Robert O
- Start date
-
- Tags
- ignition switch
PartyBarge
Well-Known Member
- Messages
- 362
- Reaction score
- 371
It's possible that neither Volvo nor Bennington know exactly what ignition switch was installed in your boat. You will likely need to have the module in-hand to see the part number (that may be a Sierra product). Then search Amazon or Ebay for that part or equivalent. Note that there are a multitude of modules, so be sure to get one that will fit your needs.
Jack M
Moderator
They pretty much generic.
https://www.amazon.com/s?k=ignition..._p13n-expert-pd-ops-ranker_ci_hl-bn-left_4_21
https://www.amazon.com/s?k=ignition..._p13n-expert-pd-ops-ranker_ci_hl-bn-left_4_21
Thank you, This switch is potted on the bottom with wires coming from within the potting/molded materials. The Man Down Kill Switch runs through this switch module. If I could get it apart I could ohm the wires with the switch positions and make a generic work. I am almost ready to cut it into 2 pieces and try from the inside out. If I knew the wiring code or colors I could make it work. the 2 red wires is where the Man Down Lanyard switch plugs in