Need ladder for 2013 20SL - was damaged and can't find exact one

MarkH42

New Member
Messages
2
Reaction score
0
Our 2013 Bennington 20SL was involved in a FREAK accident. A contractor towing a trailer and turning around in our steep driveway got stuck and nudged the boat (sitting on the trailer) sending it over a short retaining wall and careening down a hill where it slammed into our deck. The damage was minimal, all things considered, but the ladder needs to be replaced. I have attached a pic and this one has a curve on one side. We would like to go back with this exact ladder. Any ideas where we could find one like this? Thanks in advance for the help!
 

Attachments

  • Bennington 20SL Ladder Pic.jpg
    Bennington 20SL Ladder Pic.jpg
    80.7 KB · Views: 35

Jack M

Moderator
Messages
8,408
Reaction score
3,869
Location
Indian River ,Michigan
You can try greatlakesskipper.com or your dealer .
 

SEMPERFI8387

Moderator
Messages
11,960
Reaction score
6,070
Location
York, Pa
There should be a tag on the ladder with the manufacturers name. You could see if they deal directly or can direct you to a distributor if dealer doesn’t pan out.
 

Unishot

Well-Known Member
Messages
123
Reaction score
175
Check out Bearcat corporation. I’ll bet money that in 2013 Bennington was using them for the OEM ladders. Even if they weren’t, they can make you one exactly like what you have.

Website: www.bearcatcorp.com
 
Last edited:

JohnL

Well-Known Member
Messages
121
Reaction score
86
Location
Delaware
Another vote for Bearcat Corp. All I had to do was send them a picture to them and the year/model of the boat. They had the new lower section to me in less than 2 weeks
 

DVW

Member
Messages
5
Reaction score
14
If you have not found a ladder by now I have a one off the new version of your boat. I tore it off my new SL to make room for modifications. The newer ladder has a small sundeck that is 43 inches wide (see photo). I only want a few dollars for it.

1642139208306.jpeg
 

MarkH42

New Member
Messages
2
Reaction score
0
Hmmmm......that might work. Your timing is great because I am headed down there tonight to work on a few things and I'll consider this. Thanks and I'll be in touch.

Mark
 

Unishot

Well-Known Member
Messages
123
Reaction score
175
If the original poster does not want it, I do. I have dents in mine, and it's only a 3-step. (Was going to replace it this year). Kindly let me know, and we can work out the details.
 

Jack M

Moderator
Messages
8,408
Reaction score
3,869
Location
Indian River ,Michigan
Click on their name or the envelope at the top of the page,start new conversation.
 
Top