Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Gives us the model number off the engine and take a pic of the motor mounted on the boat.Somethings not right, did the motor come with the boat or did the dealer supply it?? I’m not thinking this is a Bennington issue but a dealer issue. My 24SSLX runs 42mph at 5450 rpm, no way your 22 w/150 shouldn’t hit 40 or darn close. You’re positive it’s an SPS hull, 3 full toons. Not being a jerk asking facts.
Gives us the model number off the engine and take a pic of the motor mounted on the boat.Somethings not right, did the motor come with the boat or did the dealer supply it?? I’m not thinking this is a Bennington issue but a dealer issue. My 24SSLX runs 42mph at 5450 rpm, no way your 22 w/150 shouldn’t hit 40 or darn close. You’re positive it’s an SPS hull, 3 full toons. Not being a jerk asking facts.
Yes, watched full range of guage. It seems to be correct. If you seen pic of guage, mine won't even run there with cavitating.Have you watched full range of trim and see how the gauge follows? Perhaps the calibration is wrong, gauge bad? At speed I'm around 1/2 to 3/4 depending on load.
the Suzukis have a unique gear ratio so don't go by mine but most on here with similar, i think, go around a 15/15.Also, prop is 16" x 11p, does that sound right?
Dealer installed motor. I bought off showroom floor. It had nothing on it.
Dealer is talking to bennington now. Waiting for their reply. Not sure if something has change from '18. Just cant believe that motor cant be trimmed up at all. Also, prop is 16" x 11p, does that sound right?
I have an RCW with the arch ,much heavier than your 22 SLX .I can hit 38 . You should be in the 40'sDealer spoke with bennington. Said they've tested my boat and motor extensively. Said I should get 33mph and will not be able to trim anymore then what i got now. Dealer is sending me a prop to try.