adkboater
Well-Known Member
Everytime I tow my boat and I look in the mirror on the what would be the starboard side of the boat, it looks as though my nose cone is twisted. I thought it was just my mirror angle and never thought too much about it. My last trip I was stuck in traffic and kept seeing what I thought what a mirror issue. As it turns out, I measured all the centers today and the top of the toons measure 77-1/16 center to center as you get to the bottom of the tune, right before I hit the trailer bunks it measures 77-13/16". I measured to the center toon to make sure I was not missing something but my center and port toons are dead nuts on and perpendicular to the deck. I just assume the nose cone was welded on a slight twist? This may or may not be in the parameters but I figured I'd get a couple thoughts on here. I would assume the only obvious way to repair it would be to cut of the nose cone and re-weld it or replace the toon?? Nothing life or death, boat works fine, I bleed Bennington.....but I might catch Andy if it was straight!
Thanks for any input!
Thanks for any input!