Replacement Aluminum Panels

[Mike Denkman]

2013 GCW 2275 Black on Tan.... while out playing at the lake my driver (children) took a pretty big wave over the right front toon and the aluminum panel that skirts the boat (black) took a shot and bent/puckered in. tried to pull back out w suction... its not quite right. Would like to remove the seats and replace the aluminum skirting on the front right. Does anyone know where to source this from? I can get measurements etc...and DIY, just need to know where to get the product.
Thanks!
Lake Lanier-ATL, GA

 

[SEMPERFI8387]

Only complete fence/panel is available via dealer. The panels are crimped into the fence. Expensive lesson ....

 

[Skeester]

When I purchased my boat, someone had crashed the corner by the gas filler. I picked up a Replacement piece of sheet metal from restorepontoon.com. They only have a couple colors and black is one of them. Just uncrimp the back of fence and slide the new piece in. If you crack the crimps, use rivets to fasten the new piece in. It wasn’t very difficult. Also, the 10’x18” roll cost $50 delivered.

https://www.restorepontoon.com/pont...aDB-fUokRqcInCTKghffp-21cAMMw4_RoCwy0QAvD_BwE