This is the best I could do with copy and paste.
proudly introduces
a new luxurious outdoor upholstery with a textile feel. Developed with an exclusive process that creates a refined dimensional texture, giving it the look and feel of a high-end textile. Plus, it has all the benefits of an outdoor marine grade vinyl upholstery. With its industry leading High-Loft2 backing and Permablok3 topcoating system, BENNTEXX is extremely durable and easy to maintain.
When cleaning this product, a soft bristle brush may be necessary because of the fine texture. A stiff bristle brush will not be as effective since it cannot penetrate the subtleties of the emboss. DO NOT OVER SCRUB! Step 1: Remove excess spill with a damp microfiber cloth. Clean with a 1:1 mix of Ivory soap and water. Next, rinse with clean water and dry. IF NOT CLEAN, PROCEED TO STEP 2 ON REVERSE SIDE!
GENERAL CLEANING & CARE DIRECTIONS
Always remove stains immediately. Upholstery must be kept CLEAN!
®
®
®
™
FOR TOUGH STAINS
The information published in this care guide refers to the performance of PERMABLOK3 products in specific tests conducted under laboratory conditions. Results may vary under actual conditions. This information is not a guarantee and does not relieve the user from the responsibility of the proper and safe use of the product and all cleaning agents. The use of certain agents can be harmful to the surface appearance and lifespan of vinyl. Spradling, its agents, and assigns assume no responsibility resulting from the use of such cleaning agents to the vinyl. Certain clothing and accessory dyes (such as those used on denim jeans) may migrate to lighter colors. This phenomenon is increased by humidity and temperature and is irreversible. Spradling will not assume responsibility for dye transfer caused by external contaminants. Please check compatibility when using this product in combination with painted or varnished surfaces.
Failure to care for your vinyl properly, or use of improper cleaners, may void your warranty & damage your vinyl!
Certain household cleaners, powdered abrasives, steel wool, and industrial cleaners can cause damage and discoloration and are not recommended. Dry cleaning fluids and lacquer solvents should not be used as they will remove printed pattern and gloss. Waxes should be used with caution as many contain dyes or solvents that can permanently damage the protective coating. Suntan lotion, tree pollen, wet leaves, and some other products can contain dyes that stain permanently.
Do not clean with pressure washers, as they can generate 3500 PSI and could damage the surface of your interior. Do not use kerosene, gasoline, or acetone, as they will remove the protective marine top coat. Do not use any silicone-based protectants. They will extract the plasticizer, leaving vinyl hard and brittle, and eventually cracking will occur.
Step 2: Use a straight application of concentrated cleaners such as Formula 409 or Fantastik spray cleaner. Wipe with a clean cloth, rinse with water and dry. IF NOT CLEAN, PROCEED TO STEP 3.
Step 3: Use a 1:1 mix of ammonia and water, or a 1:4 mix of bleach and water. Rinse with clean water and dry. IF NOT CLEAN, PROCEED TO STEP 4.
Step 4: Use a 1:1 mix of isopropyl alcohol and water. If the stain persists, use straight alcohol. Rinse thoroughly with clean water and pat dry. Note: For cleaning that requires step 4, use a soft cotton cloth saturated with the cleaning material and rub the stain in circles 10 times. Pat dry with another soft cotton cloth and check the results. Never use abrasive cleaners, steel wool or Magic Erasers . Do not use pressure washers!
