Bottom Paint almost complete

Poppy21

Active Member
Messages
25
Reaction score
33
The boat yard is almost finished with the bottom paint on my pontoon boat. A couple of more coats and it will be complete. I'll probably loose a little of speed but I won't have to worry about a big build up of marine growth. It was amazing how much growth was on the pontoons only after 2 weeks of not being protected. They are also welding on another tab on the opposite pontoon to install one more anode. The boat should be ready when I get back in from offshore. I ordered a new playpen cover that I will have to install while its dry docked. Also looking to install a table in the front part of the boat. Anyone have a suggestions on installing a rectangle table? I'm looking for a kit with flush mount, table, and pole. What would be the best place to purchase one since Bennington won't sell you what you don't already have.
 

Attachments

SEMPERFI8387

Moderator
Messages
10,641
Reaction score
4,660
Location
York, Pa
Your dealer can order a table setup from Bennington. You can also check greatlakesskipper.com for some oem tables.
 

Bill N

Well-Known Member
Messages
582
Reaction score
388
Your dealer can get you what you need.
Ask them for the new rectangular table, it looks great, heavier, solid and has FUNCTIONAL cupholders.
Sorry, I got not pictures, gonna have to trust me on this one.
 

ILLINOIS AVE

Well-Known Member
Messages
652
Reaction score
503
Location
Green Lake Wisconsin
The boat yard is almost finished with the bottom paint on my pontoon boat. A couple of more coats and it will be complete. I'll probably loose a little of speed but I won't have to worry about a big build up of marine growth. It was amazing how much growth was on the pontoons only after 2 weeks of not being protected. They are also welding on another tab on the opposite pontoon to install one more anode. The boat should be ready when I get back in from offshore. I ordered a new playpen cover that I will have to install while its dry docked. Also looking to install a table in the front part of the boat. Anyone have a suggestions on installing a rectangle table? I'm looking for a kit with flush mount, table, and pole. What would be the best place to purchase one since Bennington won't sell you what you don't already have.
I would have polished the top of the toons first !
 

SEMPERFI8387

Moderator
Messages
10,641
Reaction score
4,660
Location
York, Pa
Sharkhide is a sealant that keeps the aluminum from tarnishing. You may need to reapply after a couple years. We are on year 3 and still looks great above the water line.
 
Top