scubadad
Well-Known Member
The bottom edge of my seats are cloth and the 3M tape did not seem to stick very well to that. I bought some 3' lengths of thin aluminum strips from lowes that were slightly wider than my LED strip lights. I pre-drilled holes near one edge of the aluminum strips, then stuck the LED light strips just to the side of the holes. I didn't completely trust the 3M so I added a little Gorilla Glue to them as well. Then I used stainless pan-head wood screws to attach them to the bottom of the seat. Actually was easier to install than my first attempt when I tried installing the LEDs directly to the seat bottoms.