StevL
Well-Known Member
- Messages
- 473
- Reaction score
- 60
Sweet! Pulse 25?Maiden flight this weekend...
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Sweet! Pulse 25?Maiden flight this weekend...
Bingo, has been flown off land, very fun and sporty.. this weekend will be first attempt at float flyingSweet! Pulse 25?
Steve,One last thing *if you didn't know*, spray all electronics with "Corrosion X" this stuff is amazing!
Steve
Thanks for the advice Steve, I will spray the components today in preparation for the weekendI would worry more about the receiver, motor and the esc, servos are pretty good unless they get completely dunked. I actually pop the case open on my Rx and spay the entire circuit board, spray in each end of the esc (assuming it has heat shrink over it). I have never had any problems with balsa, foam, or covering.....but, I would be careful around the covering, I don't think harming it is the problem but if it lifts you may have trouble ironing it back down.
Best of luck,
Steve