Chase way from the outboard to the console? NEMA 2000 install

cwrivera

Member
Messages
7
Reaction score
11
Wondering if anyone installed a NEMA 2000 system on their bennington?
I see the control cables from my Yamaha outboard snake back to inside the console. Is there a chase way in between the floor joists? I'm thinking if I can snake through there I can pull the cable through? Thanks for everyone's help.
 

Hosstyle

Active Member
Messages
32
Reaction score
32
I would also like to add the NEMA 2000 to my motor. What Sonar are you connecting to?
 

DaveyJ

Well-Known Member
Messages
194
Reaction score
241
Location
Moorhead, MN
I installed a NMEA 2000 network on my boat and it's a pretty easy install. Since my the under-skin on my boat was removed for Sea Leg installation, I can't answer your question on the chaseway. Here's the link to my write up. Hope it helps....

 

SEMPERFI8387

Moderator
Messages
10,052
Reaction score
4,312
Location
York, Pa
Wondering if anyone installed a NEMA 2000 system on their bennington?
I see the control cables from my Yamaha outboard snake back to inside the console. Is there a chase way in between the floor joists? I'm thinking if I can snake through there I can pull the cable through? Thanks for everyone's help.
Do you have underskinning? You could unbolt the outer trim cover and run the cable up through the m brackets if so.
 
Top