Chase way from the outboard to the console? NEMA 2000 install

cwrivera

Member
Messages
8
Reaction score
11
Wondering if anyone installed a NEMA 2000 system on their bennington?
I see the control cables from my Yamaha outboard snake back to inside the console. Is there a chase way in between the floor joists? I'm thinking if I can snake through there I can pull the cable through? Thanks for everyone's help.
 
I would also like to add the NEMA 2000 to my motor. What Sonar are you connecting to?
 
I installed a NMEA 2000 network on my boat and it's a pretty easy install. Since my the under-skin on my boat was removed for Sea Leg installation, I can't answer your question on the chaseway. Here's the link to my write up. Hope it helps....

 
Wondering if anyone installed a NEMA 2000 system on their bennington?
I see the control cables from my Yamaha outboard snake back to inside the console. Is there a chase way in between the floor joists? I'm thinking if I can snake through there I can pull the cable through? Thanks for everyone's help.

Do you have underskinning? You could unbolt the outer trim cover and run the cable up through the m brackets if so.
 
Back
Top