prd2hnt
Well-Known Member
Or whatever it is called. We have a 21slx and just order the piece to fill in the bow section.
Anybody have this on an S?
Anybody have this on an S?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
There's some other threads on it, but apparently that is not the case with all boats. Some models have slightly smaller or larger port side openings so it may fit or it might be like a half inch too narrow. Hence why they call it the bow gate seat, I guess.It does fit, however, up against the side boarding door.
Off topic but is that bridge as low as it looks in the top pic you posted? Looks like your top would hit if you had it raised.We bought the bow filler seat for our boat mid-summer as the dealer had them on clearance. Do we like it? It's nice if you are planning on taking out several family members or friends.....completes the full "U" couch in either the bow or stern of the boat. We normally use it in the stern while entertaining (because of the table being back there) and at the port side when we are planning on heading to the sandbar for a little swimming. This spring I figure we will keep the seat in the stern till the water warms up enough to go swimming then we may take the seat out of the boat completely as it is normally just the 2 of us cruising and the filler seat is in the way more than it gets used.
I had to have Bennington make sure it also fit to port when I ordered mine, since the showroom 2012/2013 R's I looked at back then were all too tight. The factory moved things around so there is actually about an inch or two gap now. I just stuff a thin cushion next to it to keep it in place and all is good. I suspect it became a running change so it won't necessarily fit all of them.Chris, how well does the seat fit on the port gate, I had thought it fit the front very well but was a little too small on the port gate and the look was sloppy?