lakelivin
Member
Hey All, I am so sick over a mishap on Saturday that it took me until today to calm down enough to even make this post.. New G22 (a total of 8 hours), met a gust of wind that threw her toon into the corner of a dock - I had no fender(s) which I will never do again resulting some pretty deep gouges and one approx 3 ft surface scratch. The gouges have sharp edges, I have attached some pictures for reference (each picture represents 3 different sections of the toon) I have read that folks use 600- 1000 grit sandpaper to get these filed down (although I don't want to attempt that myself) I've also read that folks have had toons replaced due to dock damage. I am not only worried about this cosmetically on brand new boat but also concerned about structural problems this may cause. All advice will be much appreciated.
![IMG_1011.JPG IMG_1011.JPG](https://club.benningtonmarine.com/data/attachments/1/1095-f1f765d7b398f1d2399648aad9d6464f.jpg)
![IMG_1010.JPG IMG_1010.JPG](https://club.benningtonmarine.com/data/attachments/1/1096-20d1b782f176a59950720ce380dc4dfb.jpg)
![IMG_1009.JPG IMG_1009.JPG](https://club.benningtonmarine.com/data/attachments/1/1097-e8672ef4c77bd25721a45d87af4a5e21.jpg)
![IMG_1011.JPG IMG_1011.JPG](https://club.benningtonmarine.com/data/attachments/1/1095-f1f765d7b398f1d2399648aad9d6464f.jpg)
![IMG_1010.JPG IMG_1010.JPG](https://club.benningtonmarine.com/data/attachments/1/1096-20d1b782f176a59950720ce380dc4dfb.jpg)
![IMG_1009.JPG IMG_1009.JPG](https://club.benningtonmarine.com/data/attachments/1/1097-e8672ef4c77bd25721a45d87af4a5e21.jpg)