Simrad Go7 not recording depth on chart screen

[Bigmike]

My simrad Go7 stopped recording depth while on chart screen. Reads perfectly including depth on downscan screen. Transducer had minimal growth that brushed off. Any thoughts are appreciated.

 

[Jack M]

If it is reading on one screen but not the other ,it could be the GO 7 . Check with your dealer ,should be warranty .
Here is the link to the Simrad Support page .

Contact Simrad

Contact details for Simrad brand

www.simrad-yachting.com

 

[Jack M]

Another thought , mines still is in storage ( GO9 ) ,If I remember correctly after an update last year I had to reset my screens , adding what ever I wanted to see to each individual screen . Depth ,speed, water temp etc .

 

[CLDave]

When I updated the firmware on my GO9 I had to tweak settings to get depth readings back. It's not tough, but you will need to tinker around with settings to get everything where you want it. Mine's still in storage for a few weeks, sorry I can't help more. Should be fixable.

 

[Bigmike]

Thanks to everyone who replied. I reset the echo/transducer settings and it came back on. Another crisis averted. A good weekend to all