Elliptical toon trailer

Dgj

Well-Known Member
Messages
173
Reaction score
132
I have searched and searched and can not find how much lower to set my trailer in the center as compared to the outside 2 toons. 25q. With the center elliptical toon. I have seen it in a diagram but now I can’t find it.
 

CLDave

Well-Known Member
Messages
133
Reaction score
267
That's easy - set them all at the same height, with the center bunk exactly in the middle.
 

Dgj

Well-Known Member
Messages
173
Reaction score
132
The center elliptical toon is larger making the boards lower in middle.
 

The Hillbilly Barge

Well-Known Member
Messages
154
Reaction score
158
They are not the same, I put them all the same, then loosen the center with a block of wood and floor jack and lowering until the outside toons rests on the bunk
 

BigKahuna

Well-Known Member
Messages
4,571
Reaction score
3,332
Location
North Carolina
 

Bill N

Well-Known Member
Messages
930
Reaction score
873
I leave the middle slightly lower. Once boat is on trailer I raise center bunk to share some of the load.
These boats are built so well that I wouldn't be afraid to use a two bunk trailer temporarily if I had to.
 
Top